volume production
Large volume automated production
As well as hand crafted gaskets for one-off applications, Swanson’s has the capacity to produce large volume runs of mass produced gaskets.
Swanson’s have expert tool makers to produce dies to cut gaskets to precise tolerances and automated machinery to meet the needs of some of Australia’s leading automotive suppliers.    
about us
is a family owned and operated business with a history covering three generations.                                                started making gaskets in a small tin shed with a dirt floor in Stanmore in 1942.
                                     continued the business for many years from Chatswood and still takes an active part in the firm today.
joined the company in the early 80s, moving the firm to the current address in Hornsby in 1995.
Much of the expertise for producing specialised hand-made gaskets for a wide variety of applications, has been handed down through these three generations.
Individual hand-made gaskets and large volume automated production As well as manufacturing hand crafted gaskets for one-off applications Swanson’s has the capacity to produce large volume runs of mass produced gaskets.
Whether it's a one-off head or exhaust gasket for your vintage car, bike, boat, tractor or stationary engine... or a production run of 50,000 fuel pump, gearbox, diff or water pump gaskets... Swanson’s have the ability to meet your needs... and exceed your expectations..!
For more information or to ask for a quote please call in, phone, fax or email... or use our on-line contact formand we'll get back to you promptly
custom & one-off manufacture
Individual hand-made gaskets
Swanson’s has the capacity to supply both large volume runs of mass produced gaskets and hand crafted gaskets for one-off applications. Swanson’s have expert tool makers to produce dies to cut replacement gaskets to precise tolerances, to match the exact measurements and quality of the original, and precision machinery to cut dies in a wide range of sizes.
Much of the expertise for producing specialised hand-made gaskets, for a wide variety of applications, has been handed down through the three generations of the Swanson Family.
All gaskets are made from premium quality materials as used in original equipment by major US car manufacturers.
Restoring or refurbishing old machinery..?
For a one-off head or exhaust gasket for your vintage car, bike, boat, tractor or stationary engine, or a fuel pump, gearbox, diff or water pump...  Swanson’s have the ability to recreate the original.
For more information or to ask for a quote... please call in, phone fax or email... or use our on-line contact form and we'll get back to you promptly
All gaskets are made from premium quality materials as used in original equipment by major US car manufacturers. Oil jointing cork, rubber composite and copper are just some of the materials in daily production. Whether its a one off head or exhaust gasket for your vintage car, bike, boat, tractor or stationary engine or a production run of 50,000 fuel pump, gearbox, diff or water pump gaskets Swanson’s have the ability to meet your needs.
about us
continued the business for many years from Chatswood   and still takes an active part in the firm today. joined the company in the early 80s, moving the firm to the current address in Hornsby        in 1995.
              Much of the expertise for producing specialised hand-made gaskets for a wide variety of applications, has been handed down through these three generations.
Individual hand-made gaskets and large volume automated production As well as hand crafted gaskets for one-off applications Swanson’s has the capacity to produce large volume runs of mass produced gaskets.
Whether it's a one-off head or exhaust gasket for your vintage car, bike, boat, tractor or stationary engine... or a production run of 50,000 fuel pump, gearbox, diff or water pump gaskets... Swanson’s have the ability to meet your needs... and exceed your expectations..!
For more information... or to ask for a quote... please call in, phone, fax or email... or use our on-line contact form, and we'll get back to you promptly
volume production
Large volume automated production
As well as hand crafted gaskets for one-off applications, Swanson’s has the capacity to produce large volume runs of mass produced gaskets.
Swanson’s have expert tool makers to produce dies to cut gaskets to precise tolerances and automated machinery to meet the needs of some of Australia’s leading automotive suppliers.    
All gaskets are made from premium quality materials as used in original equipment by major US car manufacturers. Oil jointing cork, rubber composite and copper are just some of the materials in daily production. Whether its a one off head or exhaust gasket for your vintage car, bike, boat, tractor or stationary engine or a production run of 50,000 fuel pump, gearbox, diff or water pump gaskets Swanson’s have the ability to meet your needs.
For more information... or to ask for a quote... please call in, phone, fax or email... or use our on-line contact form, and we'll get back to you promptly
custom & one-off manufacture
Individual hand-made gaskets
Swanson’s has the capacity to supply both large volume runs of mass produced gaskets and hand crafted gaskets for one off applications. Swanson’s have expert tool makers to produce dies to cut replacement gaskets to precise tolerances, to match the exact measurements and quality of the original, and precision machinery to cut dies in a wide range of sizes.
Much of the expertise for producing specialised hand-made gaskets, for a wide variety of applications, has been handed down through the three generations of the Swanson Family.
All gaskets are made from premium quality materials as used in original equipment by major US car manufacturers.
Restoring or refurbishing old machinery..?
For a one off head or exhaust gasket for your vintage car, bike, boat, tractor or stationary engine, or a fuel pump, gearbox, diff or water pump...  Swanson’s have the ability to recreate the original.
is a family owned and operated business with a history covering three generations.                                  started making gaskets in a small tin shed with a dirt floor in Stanmore in 1942.
about us
continued the business for many years   from Chatswood and still takes an active part in the firm today. is a family owned and operated business                                with a history covering three generations.                                 started making gaskets in a small tin shed with a dirt floor in Stanmore in 1942. joined the company in the early 80s, moving         the firm to the current address in Hornsby in 1995.
Much of the expertise for producing specialised hand-made gaskets for a wide variety of applications, has been handed down through these three generations.
Whether it's a one-off head or exhaust gasket for your vintage car, bike, boat, tractor or stationary engine or a production run of 50,000 fuel pump, gearbox, diff or water pump gaskets, Swanson’s have the ability to meet your needs... and exceed your expectations..!
For more information... or to ask for a quote... please call in, phone, fax or email... or use our on-line contact form, and we'll get back to you promptly
volume production
Large volume automated production
As well as hand crafted gaskets for one-off applications, Swanson’s has the capacity to produce large volume runs of mass produced gaskets.
Swanson’s have expert tool makers to produce dies to cut gaskets to precise tolerances and automated machinery to meet the needs of some of Australia’s leading automotive suppliers.    
All gaskets are made from premium quality materials as used in original equipment by major US car manufacturers.
Oil jointing cork, rubber composite and copper are just some of the materials in daily production.
Whether its a one off head or exhaust gasket for your vintage car, bike, boat, tractor or stationary engine or a production run of 50,000 fuel pump, gearbox, diff or water pump gaskets, Swanson’s have the ability to meet your needs.
For more information... or to ask for a quote... please phone, fax or email... or use our on-line contact form and we'll get back to you promptly
custom & one-off manufacture
Individual hand-made gaskets
Swanson’s has the capacity to supply both large volume runs of mass produced gaskets and hand crafted gaskets for one-off applications. Swanson’s have expert tool makers to produce dies to cut replacement gaskets to precise tolerances, to match the exact measurements and quality of the original, and precision machinery to cut dies in a wide range of sizes.
Much of the expertise for producing specialised hand-made gaskets, for a wide variety of applications, has been handed down through the three generations of the Swanson Family.
All gaskets are made from premium quality materials as used in original equipment by major US car manufacturers.
Restoring or refurbishing old machinery..?
For a one off head or exhaust gasket for your vintage car, bike, boat, tractor or stationary engine, or a fuel pump, gearbox, diff or water pump...  Swanson’s have the ability to recreate the original.
Oil jointing cork, rubber composite and copper are just some of the materials in daily production.
Whether its a one off head or exhaust gasket for your vintage car, bike, boat, tractor or stationary engine or a production run of 50,000 fuel pump, gearbox, diff or water pump gaskets Swanson’s have the ability to meet your needs.
volume production
Large volume automated production
As well as hand crafted gaskets for one-off applications, Swanson’s has the capacity to produce large volume runs of mass produced gaskets.
Swanson’s have expert tool makers to produce dies to cut gaskets to precise tolerances and automated machinery to meet the needs of some of Australia’s leading automotive suppliers.    
about  us
Swansons Gaskets is a family owned and operated business with a history covering three generations. Alexander Swanson started making gaskets in a small shed with a dirt floor in Stanmore in 1942.  
Ron Swanson continued the business for many years from Chatswood and still takes an active part in the firm today.
Craig Swanson joined the company in the early 80s, moving the firm to the current address in Hornsby in 1995.
Much of the expertise for producing specialised hand-made gaskets for a wide variety of applications, has been handed down through these three generations.
Individual hand-made gaskets and large volume automated production As well as manufacturing hand crafted gaskets for one-off applications Swanson’s has the capacity to produce large volume runs of mass produced gaskets.
Whether it's a one-off head or exhaust gasket for your vintage car, bike, boat, tractor or stationary engine... or a production run of 50,000 fuel pump, gearbox, diff or water pump gaskets... Swanson’s have the ability to meet your needs... and exceed your expectations..!
For more information or to ask for a quote please call in, phone, fax or email... or use our on-line contact form and we'll get back to you promptly
custom & one-off manufacture
Individual hand-made gaskets
Swanson’s has the capacity to supply both large volume runs of mass produced gaskets and hand crafted gaskets for one-off applications. Swanson’s have expert tool makers to produce dies to cut replacement gaskets to precise tolerances, to match the exact measurements and quality of the original, and precision machinery to cut dies in a wide range of sizes.
All gaskets are made from premium quality materials as used in original equipment by major US car manufacturers.
For more information or to ask for a quote... please call in, phone fax or email... or use our on-line contact form and we'll get back to you promptly
Much of the expertise for producing specialised hand-made gaskets, for a wide variety of applications, has been handed down through the three generations of the Swanson Family.
All gaskets are made from premium quality materials as used in original equipment by major US car manufacturers.
Restoring or refurbishing                              old machinery..?
For a one off head or exhaust gasket for your vintage car, bike, boat, tractor or stationary engine, or a fuel pump, gearbox, diff or water pump...  Swanson’s have the ability to recreate the original.
Unit 3 / 8 Leighton Place  Hornsby  NSW  2077
MENU

MENU